XLASE PLUS

CPL Calibrated Pulsed Light

TECHNICAL SPECIFICATIONS AND FOCUS ON THE TECHNOLOGY

XLASE PLUS

CPL Calibrated Pulsed Light

TECHNICAL SPECIFICATIONS AND FOCUS ON THE TECHNOLOGY
SUPPLY VOLTAGE 110-240V 50/60Hz
MAX POWER 2000 W
INTERFACE 10″ LCD TouchScreen Colour Display
DIMENSIONS 340 x 670 x 1000mm
WEIGHT 71Kg
SYSTEM COOLING Water / Air / Thermoelectric
 
SOURCE Xenon Lamp
EMISSION SPECTRUM 550-1200nm; 550-950nm; 650-950nm
410-1200nm; 695-1200nm; 755-1200nm
PULSE DURATION 5 to 50 ms
ENERGY DENSITY Up to 36 J/cm2
NUMBERS OF PULSES 1 to 5
PULSE FREQUENCY 1 to 3 Hz
AREA 10mm x 50mm (5cm2)
EMISSION CONTROL Footswitch & Handpiece switch

CPL Calibrated Pulsed Light

Made of ABS material, the handpiece is electrically and thermally insulated, protecting patient and operator.

The sapphire tip optimizes the energy transmission effect on the skin and cools the skin during the entire session, minimizing the risk of burns and keeping the heat in the dermis where the hair follicles are treated.

Possibility of laser emission by means of a button on the handpiece or a foot pedal.

The ergonomics, ease of handling and light weight of the handpiece make the treatments quick and easy, facilitating the specialist’s smooth movements.

Interchangeable tips of different sizes depending on the body area to be treated, to maximize precision, speed and comfort of the session.

Integrated microchip for automatic recognition of the handpiece from the platform and control of the duration of the laser source.

Focus on the technology

PCCD Constant current generator

The homogeneous and constant current flow that powers the lamp uses a sophisticated electronic system that promotes an even spectral emission of light during the entire pulse duration, thereby creating a much more efficient heating effect on the target and significantly improving the clinical result. The perfectly square shape of the pulse emitted by the current generator differs from standard technologies and ensures better results and patient comfort during the entire treatment.

The advantages of CPL technology

The Xenon lamp inside the applicator has a large treatment surface (5cm2) and the guiding glass that directs the light beam is cooled to protect the skin on the surface. A slot positioned on the side of the applicator allows the filtering of the wavelength of the lamp by inserting a cut-off filter, to adapt the light output to the required treatment and to the patient’s skin.

Volumetric toning

The most effective solution to treat photoaging and skin rejuvenation through the emission of a prolonged pulse train (15 pulses per second).

Optical filters

6 optical filters ensure greater selectivity of the emitted wavelength, effectively treating a variety of skin problems.

Efficiency and durability

The platinum-coated radiating cavity allows a reflectivity of more than 98%. Its exceptionally uniform coating ensures efficiency and durability.

Cooling

The contact cooling integrated in the handpiece cools down the skin while minimizing the thermal effect thus allowing the use of higher fluences.

Software interface

Intuitive, simple parameter setting. Wide range of treatment modes.