The most effective solution to treat facial blemishes, thanks to the selectivity of the photo-thermolysis effect

• The special reflective cavity, coated in platinum, generates high energy density in the CPL module. The user-friendly system is simple to use and allows the operator to easily set all the treatment parameters.
• The energy impacts on the nature of the light-fabric interaction and the operator can increase the value up to 26J / cm2.
• The pulse duration can be adjusted by the operator by selecting the duration from 10 to 50 ms.
• The time interval between one micro pulse and the next, makes it possible to modulate the release of energy in relation to the skin’s cooling time.
• The Cut-off filters of the CPL handpiece emit in a range between 600 and 1100 nm and offer the possibility to use up to 5 wavelengths to adapt the treatment to the phototype and to the target/skin problem to be treated.

Aluminium reflector cavity. Optimises lamp irradiance and generates an intense light beam that increases energy efficiency.

The glass prism that guides the light and remains in direct contact with the skin. It cools down to protect the skin before, during and after the light transmission.

The Xenon lamp, it allows a rapid coverage of the treatment area, permitting one to operate with a maximum frequency of 3 pulses a second.

A lateral slot allows the operator to modify the filtering of the lamp wavelength, thus adapting the light emission to the treatment.