Facial treatment technologies

 

RENOVA OMNIA

TECHNICAL SPECIFICATIONS AND FOCUS ON THE TECHNOLOGY

Main voltage 230 Vac 50/60 Hz
Maximum Power 350W
Fuses 2 x F4A 250V
Class and Type I BF
Dimensions 680x470x350mm
Weight 25Kg
Frequency 3MHz
Pulse Duration 50 – 200ms
Material Aluminium oxide
Max suction pressure 66,6kPa
Laser wavelength (pointer) 650nm
Laser power (pointer) 1mW
Minimum temperature 0° C
Operating mode Continuous
Maximum vacuum intensity -50cmHg
Frequency 1kHz

Focus on the technology.

The variety of treatment applications which increase in a surprising way the quality of the aesthetic results.

CFU

Center Focused Ultrasound Treatment can be customized to meet the unique physical characteristics of the skin of each person, by adjusting energy of CFU focal depth. The ultrasound geometric focus configuration, selects the depth and quantity of energy delivered during treatment. Face procedures utilize focal depths of 1.5, 3.0 and 4.5 mm. They can be used in combination to target the dermis (1.5 mm), deep dermis (3.0 mm), or the subdermal tissues (4.5 mm) including the SMAS layer. Body procedure in the treatment of unwanted fat is performed using focal depths of 6, 9 and 11mm. The unique operating feature, EASYFLOW®, allows fast pulses delivery to selected treatment area achieving desired heat level for high speed procedure.

ABRALASE – MDA

The MDA procedure consists on the projection of fine aluminum crystals onto the skin and in a gentle abrasion of its upper layers. At the same time, the vacuum function featured by the same handpiece, retrieves the residues of dead cells together with any crystals remained on the skin. Peeling depth is dependent on strength of the crystals flow, speed of movement of the handpiece and the number of passes per anatomic site. As the treated area regenerates, the newly formed is smoother and firmer. The particles used in the MDA procedure are from a particular type of artificial diamond, are considered “inert” and have the advantage to promote a mild abrasive action, without the risk to trigger allergic reactions.

SUB CTR

SUB CTR monopolar radio frequency, targets deeper layers of the skin, causing it to react to low frequency heat energy that do not burn or damage the outer layer of the skin. The heat produced by the tissue’s electrical resistance converts the electric current to thermal energy deeper within the dermis. When low frequency waves interact with the skin, through a conduit called a node, they cause vibrations that lead the skin to tighten. As the skin tightens, pores begin to close and wrinkles naturally become less prominent. This effect is faster than waiting for the skin to absorb nutrients and moisture from lotions and other treatments. The tip of the handpiece is protected with the exclusive Propatch: Single-use, disposable, saline gel patch that guarantees uniform thermal emission, eliminating the risk of superficial blisters.

FLASH CTR

FLASH CTR emits bipolar radiofrequency with rhythmic vacuum, which is transferred into the superficial dermis, creating an even heating, hence stimulating contraction and regeneration of collagen fibers, which allows for precise skin remodeling. The vacuum suction increases the diffusion of oxygen between cells and a coupling effect is formed, resulting in a very powerful and effective treatment.

FRACTION RF

The procedure features the combination of radiofrequency, microneedling and vacuum to treat scar tissue, stretch marks and to fight skin laxity. It utilizes sterile disposable multi-needles electrode of 0.5mm length. Radiofrequency heats up the dermis at 360 degrees around each microneedle tip generating collagen tightening and synthesis. At the same time, the RF provides micro-ablation of the upper layers of the epidermis and mild coagulation for controlled fractional abiation and skin rejuvenation.

MESO

Meso electroporation uses the properties of high-intensity pulses to ensure a deep penetration of skin formulations and active ingredients. It uses modulated currents at low intensity that create new extracellular pathways. Electroporation acts directly on the skin, temporarily increasing the permeability of the tissue. The electrical field is applied to cells in order to increase the permeability of the cell membrane.

FACEFORM

FACEFORM refers to the biosculpting of facial contour, using vacuum, controlled cooling and combined with the benefit of a sequence of different electrical frequencies. Facial multi-dimensional stimulation accomplishes specific aesthetic actions, helping release fat, drain, contouring the face, neck and double chin.